FAQ
Benchmark Series
Thermally modified white ash and thermally modified Scots pine.
Thermory has over 20 years of experience thermally modifying wood. We’ve sold over 200 million sq. ft. world wide.
No, absolutely no chemicals – only heat and steam.
White ash is sourced from North America and northern Europe. Scots pine is sourced from Scandinavia.
Perpendicular installations: support joists should be no more than 16” on center.
45º angle installations: support joists should be 12” on center.
Rebel Series – Drift
Finland
We’ve produced over 8 million sq. ft. of spruce cladding (so far)!
Picea abies, commonly referred to as Norway spruce. Janka is 380 (cedar’s is 350).
A water- and acrylate-based exterior paint, produced by Teknos, a 70-year-old Finnish company.
Indoors, product should be installed with nails or screws. SS fasteners are not required.
No, standard wood installation practices should be followed.
For very wet areas it is optional to use a 1 mm gap between boards.
3-5 years without any major change in appearance.
It can be nailed with a brad nail or screws, but only stainless steel.
Air space is always needed to avoid moisture accumulating behind the boards.
No need to treat the ends. Back side is already oiled. Cuts should be sealed with touch-up paint or sealer.
16“ spacing is recommended.
No, the soft wood is what splinters and this has been brushed away.
Rebel Series – Ignite
Finland
A water- and acrylate-based exterior paint, produced by Teknos, a 70-year-old Finnish company.
The texture is embossed with a large roller before the black finish is applied and is quite permanent.
Due to the manufacturing process all boards will be random in their pattern with little-to-no chance of replication.
No, it is water based.
Ignite cladding can create the perfect accent wall or ceiling without worrying about any char.
5 years without any major change in appearance.
No need to treat the ends already finished. Back side is already sealed. Cuts should be sealed with touch-up paint or sealer.
16“ spacing is recommended, 24” maximum.
Rebel Series – Kodiak
Finland
No, that side contains the pith of the tree and is not as durable as the wire-brushed side. There is an offset groove on this side to deter its use.
Picea abies, commonly referred to as Norway spruce. Janka is 380 (cedar’s is 350).
No, the soft wood is what splinters and this has been brushed away. It is very conformable to walk on, even with bare feet.
Only if the deck is not maintained properly. Regular yearly cleaning is important to remove dust and debris that might gather in the shallow areas.
Please reference our install guides that cover either the decking or the cladding.
Saunas
Yes! We offer accessories to help you take your sauna to the next level. From a bucket and ladle to a headrest, we’ve got you covered. Talk to your sales representative about available accessories.
Our barrel saunas are made of Nordic spruce sustainably sourced from forests in Northern Europe. It’s also thermally modified, which means it’s aesthetically pleasing with enhanced durability, biological resistance, and stability compared to conventional timber. Our sauna materials feature a variety of hardwoods, including alder, aspen, and thermo-aspen.
Yes, our freestanding saunas are made to be assembly ready and can be set up in just four to six hours by a team of two to three people with moderate DIY skills. NOTE: If you choose an electric stove, installation will require hooking up electric lines. For our sauna materials, we recommend hiring a contractor.
You will sweat a lot when in a sauna. There are several steps you should take before, during, and after your session to help your body reap all the health benefits. Drink lots of water, bring two towels, and remove all your jewelry and technology.
